specifications of any and all sanyo semiconductor co.,l td. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' sproductsor equipment. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general el ectronics equipment (home appliances, av equipment, communication device, office equipment, industrial equ ipment etc.). the products mentioned herein shall not be intended for use for any "special application" (medica l equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, t ransportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of re liability and can directly threaten human lives in case of failure or malfunction of the product or may cause har m to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for app lications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. if there is n o consultation or inquiry before the intended use, our customer shall be solely responsible for the use. 80807 ms pc 20070703-s00004 no.a0887-1/9 LA73065VA overview this LA73065VA is hd video driver. this ic output comp onent and rgb. it built in the 12mhz/30mhz-lpf. it is the best for the filter to remove the digital clock noise of the compone nt or rgb analog video signal. functions ? three channel output ? 12mhz or 30mhz low pass filter ? 6db amplifier ? output mute ? d_dc_output ? standby mode specifications maximum ratings at ta = 25 c parameter symbol conditions ratings unit maximum supply voltage v cc max 6.0 v allowable power dissipation pd max ta 75 c * 500 mw operating temperature topr -20 to +75 c storage temperature tstg -40 to +150 c * : mounted on a board : 114.3mm 76.1mm 1.6mm, glass epoxy board. recommended operating conditions at ta = 25 c parameter symbol conditions ratings unit recommended supply voltage v cc 5.0 v operating supply voltage range v cc opg 4.75 to 5.25 v input pin voltage application range v in -0.3 to v cc opg+0.3 monolithic linear ic for wideband 75 video driver orderin g numbe r : ena0887
LA73065VA no.a0887-2/9 electrical characteristics at ta = 25 c, v cc = 5.0v input signal out parameter point signal level [vp-p] freq [hz] point conditions min typ max unit current consumption 1 - - - - - at no signal. 36 45 54 ma current consumption 2 - - - - - at no signal. standby mode. 0.0 0.5 1.0 ma internal reference regulator reg3v - - - - t24 2.8 3.0 3.2 v video driver part voltage gain 1 py, r, g, b t9a t7a t9a t11a sig1 0.3 100k t16 t18 t16 t14 output gain 5.5 6.0 6.5 db voltage gain 2 pr, pb t7a t11a sig3 0.3 100k t18 t14 output gain 5.5 6.0 6.5 db frequency response 1 py, r, g, b t9a t7a t9a t11a sig1 0.3 12m t16 t18 t16 t14 12mhz lpf is selected. f = 12mhz/100khz -3 0.0 3 db frequency response 2 pr, pb t7a t11a sig3 0.3 12m t18 t14 12mhz lpf is selected. f = 12mhz/100khz -3 0.0 3 db frequency response 3 py, r, g, b t9a t7a t9a t11a sig1 0.3 75m t16 t18 t16 t14 12mhz lpf is selected. f = 75mhz/100khz -40 -30 db frequency response 4 pr, pb t7a t11a sig3 0.3 75m t18 t14 12mhz lpf is selected. f = 75mhz/100khz -40 -30 db frequency response 5 py, r, g, b t9a t7a t9a t11a sig1 0.3 20m t16 t16 t14 30mhz lpf is selected. f = 20mhz/100khz -1 0.0 1 db frequency response 6 pr, pb t7a t11a sig3 0.3 20m t18 t14 30mhz lpf is selected. f = 20mhz/100khz -1 0.0 1 db frequency response 7 py, r, g, b t9a t7a t9a t11a sig1 0.3 30m t16 t16 t14 30mhz lpf is selected. f = 30mhz/100khz -3.5 -1.0 1.5 db frequency response 8 pr, pb t7a t11a sig3 0.3 30m t18 t14 30mhz lpf is selected. f = 30mhz/100khz -3.5 -1.0 1.5 db frequency response 9 py, r, g, b t9a t7a t9a t11a sig1 0.3 75m t16 t16 t14 30mhz lpf is selected. f = 75mhz/100khz -40 -30 db frequency response 10 pr, pb t7a t11a sig3 0.3 75m t18 t14 30mhz lpf is selected. f = 75mhz/100khz -40 -30 db 2nd order distortion 1 py, r, g, b t9a t7a t9a t11a sig1 0.7 10m t16 t18 t16 t14 30mhz lpf is selected. -40 -30 db 2nd order distortion 2 (hd) pr, pb t7a t11a sig3 0.7 10m t18 t14 30mhz lpf is selected. -40 -30 db amount of mute attenuation 1 py, r, g, b t9a t7a t9a t11a sig1 0.7 4m t16 t18 t16 t14 -60 -50 db amount of mute attenuation 2 pr, pb t7a t11a sig3 0.7 4m t18 t14 -60 -50 db crosstalk between channels 1 py, r, g, b t9a t7a t9a t11a sig1 0.7 4m -60 -50 db continued on next page.
LA73065VA no.a0887-3/9 continued from preceding page. input signal out parameter point signal level [vp-p] freq [hz] point conditions min typ max unit crosstalk between channels 2 pr, pb t7a t11a sig3 0.7 4m -60 -50 db video s/n py, r, g, b t9a t7a t9a t11a sig2 0.65 t16 t18 t16 t14 v in = video (50% white) 30mhz lpf is selected. the band is between 100khz and 30mhz. -60 -50 db g.d.1 py, r, g, b t9a t7a t9a t11a sig1 0.3 12m t16 t18 t16 t14 12mhz lpf is selected. f = 12mhz/100khz 10 20 ns g.d.2 pr, pb t7a t11a sig3 0.3 12m t18 t14 12mhz lpf is selected. f = 12mhz/100khz 10 20 ns g.d.3 py, r, g, b t9a t7a t9a t11a sig1 0.3 30m t16 t18 t16 t14 30mhz lpf is selected. f = 30mhz/100khz 10 20 ns g.d.4 pr, pb t7a t11a sig3 0.3 30m t18 t14 30mhz lpf is selected. f = 30mhz/100khz 10 20 ns package dimensions unit : mm (typ) 3287 sanyo : ssop24(225mil) 6.4 6.5 0.5 4.4 (0.5) (1.3) 24 13 1 12 0.22 0.5 0.15 0.1 1.5max
LA73065VA no.a0887-4/9 block diagram please shorten the distance of the bold line to prevent oscillation. pin control table control voltage sw no. in_pin no. out_pin no. sw function name high (2.3v to v cc ) open low (0 to 0.7v) sw1 pin1 power_save_ctl power_save_off power_save_on sw2 pin5 input_ctl clamp_on (rgb_mode) bias_on (component_mode) sw3 pin8 filter_ctl 12m hz_lpf_on 30mhz_lpf_on sw4 pin10 hd_mute_ctl hd_mute_off hd_mute_on d_l1 pin2 pin23 d_line1 high (4.0v to v cc ) midd (1.8 to 2.4v) low (0 to 0.5v) d_l2 pin3 pin22 d_line2 high (4.0v to v cc ) low (0 to 0.5v) d_l3 pin4 pin21 d_line3 high (4.0v to v cc ) midd (1.8 to 2.4v) low (0 to 0.5v) 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 5v/2.2v/0v vreg_3v 5v/0v 5v/2.2v/0v + + mute driver 12mhz lpf 30mhz lpf bias 100k clamp sw2 sw3 sw4 sw2 sw3 sw4 6db + + mute driver 12mhz lpf 30mhz lpf clamp sw3 sw4 6db + mute driver 12mhz lpf 30mhz lpf bias 100k clamp 6db sw1:power save ctl d_line1_in (high/open/low) d_line3_in (high/open/low) sw2:input ctl (clamp or bias) sw3:firter ctl (12mhz or 30mhz) sw4:hd mute ctl gnd_hd v cc _hd d_line3_out gnd_dr_hd n.c. n.c. n.c. v cc _dr_hd pr/r_in 1 f + 1 f + 1 f py/g_in pb/b_in 330 f 75 75 75 75 1000 f 75 75 pr/r_out py/g_out pb/b_out 330 f 10k d_line2_out 10k d_line1_out vreg_3v 10k 47 f reg3v reg3v d_line2_in (high/low)
LA73065VA no.a0887-5/9 pin functions pin no. pin name dc voltage signal wave form input/output form 1 power_save_ctl 5v : power_save_off 0v : power_save_on 1 10k 100k 2 d_line1_in 5v : 1125 (1080) open : 750 (720) 0v : 525 (480) 10k 2 200k 3v_reg 200k 3 d_line2_in 5v : 59.94p/60p 0v : 59.94i/60i 3 10k 100k 4 d_line3_in 5v : 16 : 9 open : 4 : 3 letter box 0v : 4 : 3 10k 4 200k 200k 5 input_ctl 5v : clamp 0v : bias 5 10k 100k continued on next page.
LA73065VA no.a0887-6/9 continued from preceding page. pin no. pin name dc voltage signal wave form input/output form 6 v cc _hd 7 pr/r_in component : 2.3v (bias) rgb : 1.8v (clamp) 700mvp-p 700mvp-p 2.3v 1.8v 1k 110 a 7 500 clamp:off bias:off 100k 1k 50 a 8 fil_ctl 5v : 12mhz_lpf 0v : 30mhz_lpf 8 10k 100k 9 py/g_in 1.8v 700mvp-p 1.8v 1.8v 1.0vp-p 1k 110 a 9 500 1k 10 hd_mute_ctl 5v : hd_mute_off 0v : hd_mute_on 10 10k 100k continued on next page.
LA73065VA no.a0887-7/9 continued from preceding page. pin no. pin name dc voltage signal wave form input/output form 11 pb/b_in component : 2.3v (bias) rgb : 1.8v (clamp) 700mvp-p 700mvp-p 2.3v 1.8v 1k 110 a 11 500 clamp:off bias:off 100k 1k 50 a 12 gnd_hd 13 n.c. 14 pb/b_out component : 2.4v (bias) rgb : 1.3v (clamp) 1.4vp-p 1.4vp-p 2.4v 1.3v 1.3k 1.5k 14 30 30 15 gnd_dr_hd 16 py/g_out 1.3v 1.4vp-p 1.3v 1.3v 2.0vp-p 1.3k 1.5k 16 30 30 17 n.c. continued on next page.
LA73065VA no.a0887-8/9 continued from preceding page. pin no. pin name dc voltage signal wave form input/output form 18 pr/r_out component : 2.4v (bias) rgb : 1.3v (clamp) 1.4vp-p 1.4vp-p 2.4v 1.3v 1.3k 1.5k 18 30 30 19 v cc _dr_hd 20 n.c. 21 d_line3_out 5v : 16 : 9 2.2v : 4 : 3letter box 0v : 4 : 3 300 high:off low:off 500 a 21 open:off 22 d_line2_out 5v : 59.94p/60p 0v : 59.94i/60i 300 22 23 d_line1_out 5v : 1125 (1080) 2.2v : 750 (720) 0v : 525 (480) 300 high:off low:off 500 a 23 open:off 24 reg3v 3.0v 100 50 32k 24k 26k 30k 24
LA73065VA ps no.a0887-9/9 sanyo semiconductor co.,ltd. assumes no responsib ility for equipment failures that result from using products at values that exceed, even momentarily, rate d values (such as maximum ra tings, operating condition ranges, or other parameters) listed in products specif ications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-qual ity high-reliability products, however, any and all semiconductor products fail or malfunction with some probabi lity. it is possible that these probabilistic failures or malfunction could give rise to acci dents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause dam age to other property. when designing equipment, adopt safety measures so that these kinds of accidents or e vents cannot occur. such measures include but are not limited to protective circuits and error prevention c ircuits for safe design, redundant design, and structural design. upon using the technical information or products descri bed herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable f or any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. information (including circuit diagr ams and circuit parameters) herein is for example only; it is not guaranteed for volume production. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equi pment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. in the event that any or all sanyo semiconductor c o.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities conc erned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any in formation storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. sanyo semiconductor co.,ltd. assumes no responsib ility for equipment failures that result from using products at values that exceed, even momentarily, rate d values (such as maximum ra tings, operating condition ranges, or other parameters) listed in products specif ications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-qual ity high-reliability products, however, any and all semiconductor products fail or malfunction with some probabi lity. it is possible that these probabilistic failures or malfunction could give rise to acci dents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause dam age to other property. when designing equipment, adopt safety measures so that these kinds of accidents or e vents cannot occur. such measures include but are not limited to protective circuits and error prevention c ircuits for safe design, redundant design, and structural design. upon using the technical information or products descri bed herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable f or any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. information (including circuit diagr ams and circuit parameters) herein is for example only; it is not guaranteed for volume production. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equi pment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. in the event that any or all sanyo semiconductor c o.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities conc erned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any in formation storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. test input signal this catalog provides information as of january, 2007. specifications and information herein are subject to change without notice. this catalog provides information as of august, 2007. specifications and information herein are subject to change without notice. 0.3vp-p 0.35vp-p 1h 0.3vp-p vp-p 1h vp-p sin wave sin wave sig.1 sig.2 sig.3
|
